Paxar 9474 User Manual download pdf (Page 34)

One digit to control how tickets are cut.

Values: 0 = no cut

1 = cut each ticket in the batch (except last ticket)

2 = cut each ticket in the batch (including

last ticket in batch)

3 = cut between batches

NOTE: Do not use option 2 if your supply is less than 4

inches long (1016 tomms) or more than 8 inches long

(2032 tomms)

When using option 2, the first 0.7 inches of the supply cannot

be used for printing.

On non-knife printers:

On a 9474 with no knife, this parameter controls the backing

paper takeup, instead of the knife.

Values: 0 = print tags with no backing paper.

1 = print labels and take up the backing paper.

REP One to four digits for the supply repetition for cutting, and

increment/decrement field.

Values: 1-9999

PARTS One digit for the number of parts across the supply.

Values: 1-5

RESERVED Enter 0.

MODE One character to define the mode of printing, or batch

separator.

Values: 0 = separator off.

1 = double length separator (use for 924 or 925

stacker). 3 mm extra length tag on 920 stacker.

2 = normal length separator with 3 mm black stripe.

3 = 3 mm extra length tag with 6 mm stripe.

NOTE: If using value 0,1, 2, or 3, do not use a separate

batch separator packet.

3-20 Message Structures

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 95 96

No comments

Paxar 9474 User Manual Page 34