Paxar 9474 User Manual download pdf (Page 26)

Bar Code Field Record

The bar code field record is constructed as shown below.

Syntax

B##,IFLAG,IVALUE,ROW,COL,DENSITY,BFONT,

F-ROT,HEIGHT,HR

Field Contents

BARCODE Must be the letter ‘B’ for a bar code field.

The B is followed by one or two digits for the field number.

There can be up to 100 fields per format, in any combination

of text, barcode, line, or graphic fields.

Values: 0-99

IFLAG You can set numeric fields to increase or decrease in value as

each ticket is printed.

This parameter consists of one character to define the field as

incremented, decremented, or constant.

Values: I = Increment

D = Decrement

If the field does not change, define IFLAG as ‘I’ and set

IVALUE to zero (0).

NOTE: Do not select incrementing on UPC or EAN bar codes

or fields that contain a check digit.

IVALUE One to three digits to define the amount by which the value in

the field increases or decreases as each ticket is printed. If

the field does not change, define IFLAG as ‘I’ and set IVALUE

to zero (0).

NOTE: The first number in the count sequence must contain

the same number of digits as the highest number to

be counted. For example, to count the numbers 1 to

999, the first number in the sequence must be entered

as 001.

Values: 0-999

ROW One to four digits to define the row location of the field on the

supply. This is the distance from the guide edge zero point at

the bottom of the supply and the bottom of the field.

3-12 Message Structures

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 95 96

No comments

Paxar 9474 User Manual Page 26