Paxar Monarch 917 User Manual download pdf (Page 23)

Backfeed

Backfeed works by advancing each printed label to the desired

dispense position. Once that label is removed, the next label to

be printed is backed up underneath the printhead. In continuous

mode, only the last label in the batch is advanced to the dispense

position. Extended backfeed is available on 9835, 9840, or 9850

printers with a knife installed. Extended backfeed feeds a tag far

enough out to be cut and backfeeds the next tag to the printhead

line.

Extended backfeed eliminates printed tags being left between the

printhead and knife. Extended backfeed works with the selected

cut modes. Refer to the optional Packet Reference Manual to

learn how to define the Backfeed Control Packet. Extended

backfeed does not work with non-indexed (continuous)

supply/mode. Do not use backfeed (normal or extended) with

supplies less than 0.75 inches.

We recommend using 0.5-inch gap supplies in

peel mode when backfeed is disabled.

To change the setting, from the Main Menu, select Setup, then

Supply. Then, follow these steps.

1. Press L or R until you see

SUPPLY

l Backfeed r

2. Press E to set the backfeed option. You will see the

current setting, for example:

BACKFEED

l On r

Setting Supply Options 2-11

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 81 82

No comments

Paxar Monarch 917 User Manual Page 23